Chebyshev Filter Design

The aim of this experiment was to design a Chebyshev Filter.The formulae were completely different from those of Butterworth Filter.The flow followed was the same ,i.e the order and the normalised function was calculated first followed by the transfer function using BLT approach.Two types of Chebyshev Filters namely 1 and 2 were studied.The first one had ripple in Passband and the second one had ripple in Stopband.The order of the filter could be calculated from the graph by counting the number of ripples in either Stop Band or Pass Band which was interesting.It is used where the frequency content is more important than having a constant Amplitude.It is widely used in RF Applications because of its Steep Roll off.

Comments

  1. Unknown25 April 2017 at 22:10

    Chebyshev filter design using BLT is easy for obtaining final output

    ReplyDelete
    Replies
    1. shrinish_00125 April 2017 at 22:34

      Yes its an easier approach than the IIM approach.

      Delete
  2. chaitali vartak25 April 2017 at 22:12

    Informative content!

    ReplyDelete
  3. chaitali vartak25 April 2017 at 22:12

    Informative content!

    ReplyDelete
  4. Tony25 April 2017 at 22:33

    This filter has ripples

    ReplyDelete
    Replies
    1. shrinish_00125 April 2017 at 22:35

      Yes in stopband and passband for Chebyshev 1 and 2 respectively.

      Delete
  5. Unknown25 April 2017 at 22:51

    Ripples give the order of filter.

    ReplyDelete
  6. Unknown28 April 2017 at 04:55

    This filter is good if ripple can be tolerated in the application

    ReplyDelete
  7. Unknown28 April 2017 at 06:02

    Chebyshev1 doesn't have ripples in stopband

    ReplyDelete
  8. Unknown28 April 2017 at 07:23

    Chebyshev 2 has ripple in stop band

    ReplyDelete

Post a Comment

Popular posts from this blog

FIR filter design using the FSM approach.

In this the flow of the parameter calculation was kept the same as was for the window function.Nevertheless ,an added parameter called H(k) was calculated which o is the notation for DFT result.The length of this result was obtained from the Order of the filter which was given.Further omega was taken to be (2πk/N) where N was the order.One other ,slightly difficult task was plotting the realisation diagram.Ofcourse we didn't do this but the function was separated in its cascaded form for getting h(n) by sampling.The frequency sampling approach allows is to design the filter for both -std.frequency responses and arbitrary responses.Its applications include biomedical signal processing, compression etc. The main idea of the frequency sampling design method is that a desired frequency response can be approximated by sampling it of N evenly spaced points and then obtaining an interpolated frequency response that passes through the frequency sample.
Read more

Butterworth Filter Design

In this experiment we designed an IIR Filter namely Butterworth Filter.The Passband and Stop Band Attenuation were kept constant at 45db and 3db respectively.The code for the order and the normalised filter was typed according to the theory.BLT method was used for getting the exact transfer function.Further,the graph observed was minimally flat graph with no ripple in Pass band and Stop Band.Due to its maximum flat pass band nature it is used as anti-aliasing filter in data converter applications.
Read more